Page 1
Q3007
MFW. 23008 WOOD/DRAWER DOOR LOCK
9300b
PLUG PLINE FILLERS
FIGURE 1
DEAD BOLT ASSEMBLY
TQ ASSEMBLE LQQK
1 , KEY REMOVAL: The lock without spline fillers rotates 90 deg. allowing
key removal in both positions. Adding spline fillers as shown in Figure 1
will allow key removal at 12 o “clock locked position only.
2.PLUG ASSEMBLY: Hold housing and plug as in Figure 1.
Push plug into the housing until plug snaps in.
SA. DEAD BOLT ASSEMBLY: lnstall the bolt in slot as shown in Figure 1.
Cover with back plate (Stake pinsoptional).
38. SPRING BOLT ASSEMBLY: Install the spring holder in notches, as shown
FIGUREZ
SPRING BOLT ASSEMBLY
u'li W“
OLE
X X 3132'
m m/7’8. o
g 2
t _ 3 / 33%
TEMPLATE LU HEN:
SPLINE FILLERS
in Figure 2. install the spring bolt with springs and cover with back plate as shown .
(Stake pins—optional).
4. TO INSTALL: Use template provided. NotezThere are 2 different drilling positions.
Dead bolt 9; spring bolt.
@111
I
ll Ei- ITIATU INSELI' ill/i
FWFDEEY
DE.III'AHIIIDBILT3I
Z
FORT LOCK CORPORATION
3000 N. River Rd.
:River Grove, IL 60171