CompX Fort offers a wide range of single bit, double bit, and tubular cam locks to fit most applications. Can locks can be upgraded to include: overmolded keys, branded keys, key covers, and dust shutters. If we do not have the exact lock you require, CompX Fort can design and manufacture a lock to your exacting standards. For more options, please look at the general lock applications that CompX National offers.

5/8 Cam Lock- 23058

The single bitted cam locks are engineered to accommodate other manufacturers' key blanks. Click here for a key comparison chart. This gives you the opportunity to furnish your customers with additional cam locks keyed into existing systems. The locks are available in various rotations and the following lengths: 3/8", 5/8", 7/8", 1-1/8", and 1-3/8".

Wood Drawer Lock-23006

The single bitted drawer lock is easily installed and matchless industry standard mounting holes. Available in various finishes, including brass, which makes it ideal for cabinet door or drawer applications. Lock is available for the following panel thicknesses: 3/4", 7/8" and 1-1/8".

Metal Drawer Lock- 23010

The metal drawer lock is specifically designed for sheet metal applications, but can be used in a variety of places. This single bitted lock is available with bolt offsetsof 5/8" and 11/16". The lock is also available in two different bolt lengths.

Showcase Lock SG23000

The showcase lock captures glass and wood panels to prevent unauthorized entry into showcases by door spreading. There are two lock bars available: one for sliding glass and one for wood door applications. The lock is offered as single bitted for standard security applications and double bitted is offered for higher security applications.

Plunger Lock- SD990

The SD990 lock allows dor through hole mounting on wood showcase doors. It will accommodate panel thickness up to 1". The lock allows "plunger" style action to lock side by side sliding showcase doors. It is available in single bit for standard security and GEM tubular for high security.

Switch Lock- SW2-3118

The switch line is designed to carry 6 amps@110 volts. The switch is available with the following options: Momentary, Maintaining, Wire Leads, Screw Terminals, Solder Terminals, and Quick Connect (spade) Terminals. The switch is also available in three security levels: single bitted, double bitted, and GEM tubular.

Double Bitted 5/8" Cam Lock- 29058

The 29000 Series Cam Locks offer an increased level of security when needed. The lock and keys are double bitted, adding a barrier against possible lock manipulation. The lock is available in the following lengths: 5/8", 7/8", 1-1/8" and 1-3/8"

Miniature "T" Lock- 1T-058

The 1T series lock is ideal for applications with tight space constraints. The miniature lock has a diameter of 15/32", with mounting flats of 27/64". It is available with various locking cams and various key codes. Lock rotation is limited to 90 degrees.

Thumb Turn Lock- TT-058

The thumb turn lock is perfect for applications that only require non-secure latching. The thumb turn latch uses a ball detent system to index between the latched and unlatched positions. It is available in two lengths: 5/8" and 7/8".

Locking Thumb Turn Lock- LTT-078

The locking thumb turn lock allows the convenience of a simple thumb turn with the ability to lock securely. The lock utilizes a ball detent system that allows indexing between the locked and unlocked positions. The ball bearings also act as the locking means if the lock is secured. It is available in two lengths: 5/8" and 7/8".

Heavy Duty Thumb Turn Lock- PLT-078

The heavy duty thumb turn lock can be secured with a padlock. It is ideal for the industrial applications where padlocks are already in use. The lock can accept padlocks with shackle diameters up to 1/4". Lock length is limited to 7/8". Padlock not included.

5/8" GEM Tubular Lock- 1058

The Fort GEM lock is a seven pin tumbler tubular lock for high security applications. The tumbler pins are radially placed to furhter foil picking attempts. This lock is available with various locking cams and lock rotations. Available lengths are as follows: 3/8", 5/8", 7/8",1-1/8", amd 1-1/2".

Don't see what you are looking for?
What you see is only a fraction of what CompX Security Products offers. We have the design and engineering capabilities to meet your specific application needs. Contact us for more information

 

 

CompX Fort: 3000 N. River Road; River Grove, Illinois, 60171; Phone: 708.456.1100; Fax: 708.456.9476